Go Pro HERO Digital Waterproof Video Camera - Buy it now anywhere in Australia

 

Accessories for Your Go Pro HERO Digital Video Camera

Want to expand the possibilities of using your new Go Pro HERO Camera?
Here are some great accessories.

* Please note free delivery only applies to a purchase including a Go Pro HERO camera. A shipping cost will apply if purchasing accessories separately.

Helmet HERO Expansion Kit

Picture
Turns your Digital HERO 5 camera into a helmet and gear mountable camera. Includes all mounting accessories (no camera) of Helmet HERO Wide but with a quick-release housing sized to match your standard lens camera.

The included housing is ONLY compatible with regular lens cameras.


AU$ 99.99 (if ordering from outside Australia contact us)


What's Included:
  • 1 Shockproof/Waterproof Quick-Release Housing (for normal lens GoPro cameras ONLY)
  • 1 Headlamp-Style Head Strap
  • 1 Vented Hemlet Strap
  • 2 Curved, 3M™ Adhesive Mounts
  • 2 Flat, 3M™ Adhesive Mounts
  • 1 Three-Way Pivoting Side Arm Assembly
  • 2 Quick-Release Buckles
  • Warranty: One Year

Surf HERO Expansion Kit

Picture
Includes all of the mounting accessories from the Surf HERO camera, minus the waterhousing and camera. Perfect for mounting your Helmet HERO or other quick-release HERO camera on to a surfboard. 
Two mounting options:
  1. A stick-on baseplate that takes a couple of minutes to set up and go.
  2. An FCS™ compatible plug mounting system that allows you to allen-screw your camera into the deck of your board when you install an FCS™ center fin plug into the deck of your board. Easily done by any ding repairer or shaper.
Both options allow the camera to be quickly attached and removed from your surfboard.

Compatible with all quick-release GoPro cameras. NOT compatible with the Digital HERO 5 Wrist Camera.

AU$ 54.99 (if ordering from outside Australia contact us)

What's Included:
  • 1 High-Impact, 3M™ Adhesive Mounting Disc with Integrated Leash System
  • 1 FCS™-Compatible Male Plug Mount for Attaching to FCS™ Center Fin Plug
  • 1 Rubber Quick-Release Stopper Lock
  • Warranty: One Year

Motorsports HERO Expansion Kit

Picture
Turns any Go Pro HERO camera into a Motorsports HERO. Includes all mounting accessories (no camera) of Motorsports HERO Wide but with a quick-release housing sized to match your standard lens camera.

The included housing is ONLY compatible with regular lens cameras, but the suction cap is usable with all cameras.

AU$ 119.99 (if ordering from outside Australia contact us)



What's Included:
  • 1 Shockproof/Waterproof Quick-Release Housing (for normal lens GoPro cameras ONLY)
  • 1 Suction Cap Mount
  • 2 Curved, 3M™ Adhesive Mounts
  • 2 Flat, 3M™ Adhesive Mounts
  • 1 Three-Way Pivoting Side Arm Assembly
  • 2 Quick-Release Buckles
  • Warranty: One Year

Vented Helmet Strap

Picture
Vented helmet strap for your quick-release HERO camera.

One size fits all adjustability.

Compatible with all GoPro quick-release cameras including the Helmet HERO Wide, Motorsports HERO Wide, Motorsports HERO, Surf HERO, and WIDE HERO cameras. NOT compatible with the Digital HERO 5 Wrist Camera.

AU$22.00 (if ordering from outside Australia contact us)

Chest Mount Harness

Picture
Chest harness for your quick-release HERO camera. Makes it easy to capture immersive video and photo footage from, well...your chest. Perfect for skiing, mountain biking, motocross, paddle sports, or any activity where you want to get a "lower than the helmet" view of the action. See more of your arms, knees poles, and skis while skiing...or your arms and handlebars while biking or riding your motorcycle. Recommended as a more immersive way to film than on the helmet.

One size fits all adjustability.

Compatible with all GoPro quick-release cameras including the Helmet HERO Wide, Motorsports HERO Wide, Motorsports HERO, Surf HERO, and WIDE HERO cameras. Not compatible with the Digital HERO 5 Wrist Camera.

AU$ 55.00 (if ordering from outside Australia contact us)

Wrist HERO Expansion Kit

Replacement waterproof wrist housing and padded velcro strap with locking clip.
Camera not included.
NOTE: This only works for standard angle cameras. Does not work with HD and Wide Angle Cameras. A wrist strap for these will be coming out soon in early 2010.

AU$ 59.99 (if ordering from outside Australia contact us)

Roll Bar Mount

Picture
Roll bar/tube clamp for mounting the GoPro camera on to any tube or frame from 3.5cm up to 6.35cm diameter.
The ideal attachment to clamp your Go Pro camera to the radiator cap (metal or plastic) on your go kart, your bike frames, bumper bars, ski/surfboard racks, or anything else that is in the size range above.

The mount comes with pivoting arms that allow for 3-way adjustability to make sure you can get any angle you want and point the camera in any direction.

Fits any Go Pro Camera.

AU$ 49.99 (if ordering from outside Australia contact us)

   
What's Included:
  • 1 Roll Bar/Tube Clamp
  • 1 Three-way Adjustable Pivot Arm (three piece assembly)
  • Warranty: One Year

Go Pro Grab Bag

A bag full of add-on parts for Motorsport and Helmet Hero owners looking for more camera mounting options.

Includes:
2 Flat surface baseplates
2 Curved baseplates
Thumb Knob and hardware
2 Quick-release buckles
Vertical J mount for mounting camera on a vertical wall surface like a car bumper or similar

AU$ 34.99 (if ordering from outside Australia contact us)

Ride HERO Expansion Kit

A seatpost and handlebar tube clamp for mounting the Helmet Hero or Motorsports Hero on tube frames, or tubular frames ranging from 0.75" to 1.4" in diameter.
Perfect for Windsurfing booms!
Comes with orientation adjusting mounts for tons of position options.
Camera not included.


AU$ 34.99 (if ordering from outside Australia contact us)

Go Pro Quick Release Housing

Replacement quick release housing for Helmet Hero and Motorsports Hero.
Camera not included.

AU$ 59.99 (if ordering from outside Australia contact us)

Please note free delivery only applies to a purchase including a HERO camera.

Lens Replacement Kit - HD and Wide Angle

Picture
Kit comes with two replacements for the wide-angle glass lens covers which used on all HD HERO and wide-angle HERO housings.

Compatible with all HD Hero and Wide Angle Go Pro cameras...including the Helmet HERO Wide, Motorsports HERO Wide, Surf HERO, and WIDE HERO cameras. *NOT* compatible with Standard Angle cameras.

AU$ 33.00 (if ordering from outside Australia contact us)



Contents:
  • 2 Wide-Angle, Glass Lens Covers
  • 2 Rubber O-Rings
  • 6 Screws
  • 1 Screwdriver
  • Warranty: 1 Year